Flair Temperature Strip - This includes one (1) customisable temperature strip.
Pre-heating your cylinder will assist in producing quality results with your Flair. Affix this temperature strip to the outside of your cylinder and you will have confirmation of actual preheat temperature just prior to the pull. Take control of your brew and improve the consistency of your shots by placing these easy to use temperature strips on your brew heads! As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.
Reading the Results:
- TAN window is above actual temperature reading
- GREEN window is the actual temperature reading
- BLUE window is below actual temperature reading
Specifications:
- Temperature Range: 158 to 212°F/ 70 to 100°C
- Temperature Accuracy: +/- 2°C
- Size: 0.75 x 2.75'' (19 x 70 mm)
- Moisture Resistant: Self-Adhesive Backing
- Shelf Life of Adhesive (when applied correctly*): 2 yrs
*Application Instructions: Prior to application, ensure the surface is clean and dry. During the application, ensure that strip lays flat across the face of the cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip.
Please Note: This includes one (1) customisable temperature strip.