This Everpure 4H is a 1/2 micron filter cartridge with exclusive precoat filtration, providing superior chlorine taste & odour reduction. NSF/ANSI Standard 53 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means. Effectively inhibits limescale build-up in water using equpments as tested by Everpure. Not for residential use, intended for food service applications only.
The Everpure 4H cartridge is a suitable replacement for the WFA HiFlow system, Everpure 4K-Plus, H104 & S104
Specifications:
- Working Pressure: 10-125psi
- Water Temp: 2-38c
- Flow Rate: 1.9Lpm
Change every 12,000 L or 12 months - whichever comes first.
Everpure part number EV9611-00. Made in the U.S.
Cartridge Change Instructions:
- Shut off water and relieve line pressure. For heads with build-in shut-off valve, fullly lift handle until it stops. Hold head firmly. Push upward on cartridge and turn it to the left 1/4 turn, until rotation stops.
- Pull cartridge down and out of head.
- Align new cartridge lug with head label. Hold head firmly. Insert new cartridge into head.
- Turn cartridge to the right, until rotation stops. On multiple head systems, repeat steps 1-4 for each cartridge.
- Turn on water supply. For heads with built-in valve, lower handle.
- NOW FLUSH CARTRIDGE. Refer to appropriate filter system instructions & operation guide for flushing instructions.
NOTE: For head with revolving ring, make sure the valve handle locks.
